Follow An Outstanding DIY Guide To Sash Cord Replacement To Do The Task Right

You might find that you need to replace window sash cords. A DIY guide to sash cord replacement would be handy especially if you lack knowledge on how to approach the task. Replacing these could be a grueling task especially if you are doing it for the first time.

You begin by removing the stops. To accomplish this, you need to use a putty chisel to scrape off paint between window stops and window casing. Use this chisel to pry off the stops carefully. In some cases, windows come with metal guards that hold it. You need a screwdriver to unscrew the bolts holding these guards. This gives you room to unhook this from the two sides of that window.

Next are the weights that need to be removed too. To reach them, you have to remove the thin wood strips that separate your window sashes. After doing so, you reach the wood panel that covers the wells that in-turn contain the weights. You have to remove all panel screws to reach these weights, and after doing it, simply pull out the weights and loosen it.

You will be at liberty to put in place a new one after this. To make this easier, make use of a string and a small weight. Feed this string through the pulley at the top. Afterwards, lower it gently to that specific spot where the window weights rise and fall. Get it at the top of the pulley and tie it to the string. Pulling down this string from the bottom of the pulley makes it easy to get it through the pulley. Untie this string from the weights and replace it with the cords.

After fixing the cord, you set your new sash on your window sill. In-case there is any excess of this, you need to cut it off. Ensure you tie a knot and fit it to the notch on your window. Do the same on the opposite side of the window.

Installing the case is the final step in the replacement. Return into place all the metal guides you had removed before. After this, cover the weight well by re-installing the wooden panels. You must not forget about the strips too. For easy securing of the window stops into their respective places, use a hammer to drive them in place.

If you have difficulties adhering to any DIY guide to sash cord replacement, get professional help. This ensures you do not waste your time and money. This guide is very useful to those people who operate on a tight budget.

You will find a complete review of the benefits of hiring a sash window repair service provider and information about a reliable supplier of wooden sash windows, today.

This entry was posted in Do It Yourself - DIY and tagged , , , , , , , , , , . Bookmark the permalink.