Locating And Fixing Swimming Pool Leaks

If you've got a swimming pool, it can be quite easy to note a leak. When you have opened your pool for the year, you can easily spot a leak by the water gushing out. Where the leak is coming from though, may be an entirely different story. Occasionally it could be straightforward to inform, though other times pool repaircould be a bit more complex.

The very first thing you have to do, is ensure that the water you see or notice missing is actually a leak. Although you may well think it's a leak, it may be something else. Fundamentally, there are three causes of water loss with swimming pools – plumbing leaks, shell leaks, and evaporation. You should ensure you know the reason behind the leak before you go any farther. Sometimes, what you suspect is a leak may be water lost from splashing – which can simply occur if you've a lot of people diving in your pool.

Evaporation is a usual cause of water loss, and there's a way you can identify if your loss of water is indeed evaporation. To discover, take a huge container then fill it full of water and put it on the first pool step. Next, remove some water from the container sitting on the initial step, so that the water in the pool and the container are the same level. Now, let the container sit there for a few days, with nobody using the pool during the entire time.

When you check back in one or two days, the levels should be the same. If they have gone down any, then you know that evaporation from the sun is the culprit. If the water that you have in the pool dropped a great deal more than what you have in the container, you will know that you have a leak in your pool.

If you suspect that the water is going down to a pool leak, you may first need to find where the leak is coming from. You should always begin looking close to the pump and the filter. On the way, if you chance to notice any wet areas or damp areas, you need to trace the water back and see if you can find a leak. In most situations, the leak will turn out to be a connection with one of the pipes.

If it's not a pipe, then it could be a problem with the shell. If you've got an aboveground pool, easy keep an eye open for the hole where the water is leaving and fix it. On the other hand, if you have a pool that is below ground, it could be a bit more difficult. You can try checked the shell in the pool, or checking surrounding areas.

Sometimes, regardless of how hard you look, it can seem just about impossible to find where the leak is coming from. Keep in mind that if it's the shell, you should always leave it to a qualified professional to solve the problem. Shells for underground pools especially can be really hard to mend, and even harder if you know very little about swimming pools.

In most cases, locating and repairing a leak with your swimming pool is nearly just eliminating causes until you find the best one. When you have located the issue and know what is causing it, you can decide on whether to do the mend yourself or to call a certified professional and have them do the mend for you.

If you live in Toronto and have some problems with your pool, jacuzzi or Jacuzzi, contact pool repair Toronto for a free consultation. If on the other hand you've a damaged spa contact Spa Repair Toronto.

This entry was posted in Swimming Pools and tagged , , , , , . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *