Sharpening a Chainsaw for Maximum Use

Chainsaws are an outstanding tool to use on a variety of undertakings in your home. It provides power, strength, as well as a blade that basically no other tool can compete with. The key thing to always look at is if it’s in adequate operating order. A sharp blade is easier cut with, calls for far lower effort, and is safer all around as a dull blade could injure both the undertaking being worked on, or the individual using the chainsaw. It is told that a chainsaw blade requires to be sharpened after every hour or two for optimum performance, and this is the most typical way to sharpen that blade soon after every use and see it handle every undertaking on hand.

To start with chainsaw sharpening is to consider the exact size of the cutters, or saw blades. Knowing the size of the blades, you can find the size of the chainsaw file required. The chainsaw file needs to fit the same size of a typical blade, so be sure one isn’t used that is too little or too big. The chainsaw file should be used by its self, but it is not simply easier, but provides an infinitely more uniform sharpen if a sharpening guide is bought. When the tools are on hand, try sharpening the chainsaw over at a work bench or other unchanging stable surface. Check out a vise grip to grasp the bar to truly restrain it in a position and gives you sturdy chainsaw to work with.

The very first action to take would be to put the sharpening guide over the chainsaw blades, then lay the file over the guide. The chainsaw file guide we will need to have a clamp that enables it to be aligned correctly with the marks, then clamped in position to provide you with two hands to make use of. Right after the guide is in place, take hold of the file using two hands and begin to file, applying large broad strokes from inside to out. Keep on with the even strokes all the way around working first on just the right hand cutters, and then proceeding on to the left hand cutters.

Another tip is to mark where you started filing so you know when you have finished as your working your way around. Continue to file each cutter until all the signs of damage to the stihl chainsaws has been filed off. In order to get an even sharpness, each cutter will take three to five strokes of the file. Remember that the cutter edge needs to be between 25 and 35 degrees so maintain a consistent stroke to prove an even angle.

Whenever a chainsaw is properly maintained, it really is one of the most powerful tools you will ever own. The one thing to remember is that with every use, the blade will begin to wear out, and the edge will dull over time. With out sharpening, the job will get harder and less effective, and the saw will start to wear out not capable to do what is required anymore. So this does not happen, just make every effort to stick to maintaining your saw by sharpening it and keeping it in perfect working order for all your fun projects.

Want to find out more about New & Used Chainsaws, then visit Darrell Branan’s site on how to choose the best Used Stihl Chainsaws for your needs.

This entry was posted in Landscaping and tagged , , , , , , . Bookmark the permalink.